Finite element comparison of Euler–Bernoulli and Timoshenko theories in reinforced concrete beams
DOI:
https://doi.org/10.47796/ing.v8i00.1549Keywords:
structural analysis, reinforced concrete, shear, deformation, finite element method, beamsAbstract
The accuracy of the structural modeling of beams depends on the theoretical formulation adopted. This study aimed to compare the structural response of reinforced concrete beams using the Euler–Bernoulli and Timoshenko theories implemented through the finite element method. Nine beams from a building located in Tacna, Peru, were analyzed under linear elastic behavior, static loading, and equivalent geometric properties, mechanical properties, and support conditions. Both formulations were computationally implemented and verified using Abaqus. The comparison considered the maximum bending moment and shear force values. The results showed that Euler–Bernoulli yielded higher values than Timoshenko, with mean percentage differences of 0.819 % for bending moment and 0.138 % for shear force. Paired-samples t-tests revealed statistically significant differences in both parameters (p = 0.002), although these differences were small in structural terms. Additional verification using a 2D model in Abaqus yielded differences of 1.13 % and 1.86 % relative to the Euler–Bernoulli and Timoshenko formulations, respectively. It is concluded that both formulations provide similar overall responses; therefore, their selection depends on beam slenderness, the influence of shear deformation, and the required level of accuracy.
Downloads
References
Aguirre, A., Codina, R., y Baiges, J. (2023). A variational multiscale stabilized finite element formulation for Reissner–Mindlin plates and Timoshenko beams. The International Journal of Applied Finite Elements and Computer Aided Engineering, 217(103908), 103908. https://doi.org/10.1016/j.finel.2023.103908
Bang, H., y Kwon, Y. W. (2000). The finite element method using MATLAB (2.ª ed.). CRC Press. https://doi.org/10.1201/9781315275949
Bathe, K.-J. (2008). Finite element method. En Wiley encyclopedia of computer science and engineering. https://doi.org/10.1002/9780470050118.ecse159
Bosten, A., Denoël, V., Cosimo, A., Linn, J., y Brüls, O. (2023). A beam contact benchmark with analytic solution. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 103(11), e202200151. https://doi.org/10.1002/zamm.202200151
Cowper, G. R. (1966). The shear coefficient in Timoshenko’s beam theory. Journal of Applied Mechanics, 33(2), 335–340. https://doi.org/10.1115/1.3625046
Craig, R. R., y Taleff, E. M. (2021). Mechanics of materials (4.ª ed.). John Wiley & Sons. https://www.wiley.com/en-us/mechanics-of-materials-4th-edition-p-9781119603757
Khasawneh, F. A., y Segalman, D. (2019). Exact and numerically stable expressions for Euler-Bernoulli and Timoshenko beam modes. Applied Acoustics, 151, 215–228. https://doi.org/10.1016/j.apacoust.2019.03.015
Khrouf, F., y Adjemi, S. (2026). Comparative analysis of Euler–Bernoulli and Bresse–Timoshenko beam theories using mathematical formulations and finite element modeling in Abaqus CAE. Journal of Thermal Stresses, 49(5), 693–711. https://doi.org/10.1080/01495739.2025.2584157
Koç, M. A. (2021). Finite element and numerical vibration analysis of a Timoshenko and Euler–Bernoulli beams traversed by a moving high-speed train. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 43(3), 165. https://doi.org/10.1007/s40430-021-02835-7
Luo, J., Zhu, S., y Zhai, W. (2022). Exact closed-form solution for free vibration of Euler-Bernoulli and Timoshenko beams with intermediate elastic supports. International Journal of Mechanical Sciences, 213(106842), 106842. https://doi.org/10.1016/j.ijmecsci.2021.106842
Oñate, E. (2013). Structural analysis with the finite element method. Linear statics: Volume 2: Beams, plates and shells. Springer Science & Business Media. https://doi.org/10.1007/978-1-4020-8743-1
Polizzotto, C. (2015). From the Euler–Bernoulli beam to the Timoshenko one through a sequence of Reddy-type shear deformable beam models of increasing order. European Journal of Mechanics - A/Solids, 53, 62–74. https://doi.org/10.1016/j.euromechsol.2015.03.005
Ruocco, E., y Reddy, J. N. (2023). Analytical solutions of Reddy, Timoshenko and Bernoulli beam models: A comparative analysis. European Journal of Mechanics - A/Solids, 99(104953), 104953. https://doi.org/10.1016/j.euromechsol.2023.104953
Senjanović, I., Vladimir, N., y Cho, D. S. (2013). A shear locking-free beam finite element based on the modified Timoshenko beam theory. Transactions of FAMENA, 37(4), 1–16. https://hrcak.srce.hr/116188
Wang, C. M., Reddy, J. N., y Lee, K. H. (2000). Shear deformable beams and plates. Elsevier. https://doi.org/10.1016/B978-0-08-043784-2.X5000-X
Wei, G., Lardeur, P., y Druesne, F. (2022). A new solid-beam approach based on first or higher-order beam theories for finite element analysis of thin to thick structures. Finite Elements in Analysis and Design, 200(103655), 103655. https://doi.org/10.1016/j.finel.2021.103655
Więckowski, Z., y Świątkiewicz, P. (2021). Stress-based FEM in the problem of bending of Euler–Bernoulli and Timoshenko beams resting on elastic foundation. Materials, 14(2), 460. https://doi.org/10.3390/ma14020460
Wong, F. T., Santoso, S. W., y Sutrisno, M. (2022). Locking-free Kriging-based Timoshenko beam elements using an improved implementation of the discrete shear gap technique. Civil Engineering Dimension, 24(1), 11–18. https://doi.org/10.9744/ced.24.1.11-18
Wong, F. T., Sulistio, A., y Syamsoeyadi, H. (2018). Kriging-based Timoshenko beam elements with the discrete shear gap technique. International Journal of Computational Methods, 15(07), 1850064. https://doi.org/10.1142/S0219876218500640
Xu, J., Li, S., Wang, B., Li, J., y Jiang, X. (2019). Analytical finite element for Timoshenko beams. Journal of Southwest Jiaotong University, 54(3), 492–498. https://doi.org/10.3969/j.issn.0258-2724.20180176
Zhang, X., Thompson, D., y Sheng, X. (2020). Differences between Euler-Bernoulli and Timoshenko beam formulations for calculating the effects of moving loads on a periodically supported beam. Journal of Sound and Vibration, 481(115432), 115432. https://doi.org/10.1016/j.jsv.2020.115432
Zienkiewicz, O. C., Taylor, R. L., y Zhu, J. Z. (2005). The finite element method: Its basis and fundamentals. Elsevier. https://doi.org/10.1016/C2009-0-24909-9
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Jorge Enrique Alvarez Ruffran, José Claudio Guevara Bendezú

This work is licensed under a Creative Commons Attribution 4.0 International License.





